Road Construction Chemicals

  • Bitumen Emulsifier for CRS/CMS/CSS Emulsion
  • Bitumen Emulsifier for Micro Surfacing
  • Bitumen Emulsifier for Anionic Emulsion
  • Bitumen Emulsifier for Cold Mix Application
  • Liquid Anti Stripping Agent
  • Warm Mix Additive





  • Bitumen Emulsifier for CRS/CMS/CSS Emulsion


    Bitumen Emulsifiers are Emulsifying Agents added to Bitumen Emulsion to promote emulsification process.

    REDICOTE E-4819

      This Emulsifier is for rapid Setting Cationic Bitumen Emulsions



    which are designed to react quickly with aggregate and revert from the emulsion state to bitumen.
    It is used primarily for spray applications, such as aggregate (chip) seals, surface treatments and Asphalt Penetration Macadam.

    Medium Setting Cationic Bitumen Emulsions :

    which are designed for mixing with coarse aggregate. Since these grades do not break immediately
    upon contact with aggregate, mixes using them remain workable for a few minutes.

    REDICOTE E-11


    Redicote E-11 is a liquid water-soluble emulsifier for Cationic Slow Setting Emulsions used in slurry surfacing, cold mixes and cold recycling. It can also be used as a control additive ("dope") to extend the mixing time of slurry mixes. This Emulsifier is completely water soluble and water phases based only on Redicote E-11 need not be acidified; hydrochloric acid may be used to adjust the pH of the water phase if required.


    REDICOTE E-4875


    Redicote E 4875 is a liquid water-soluble emulsifier for Cationic Slow Setting Emulsions used in slurry surfacing, cold mixes and cold recycling. It can also be used as a control additive ("dope") to extend the mixing time of slurry mixes. This Emulsifier is completely water soluble and water phases based only on Redicote E-11 need not be acidified; hydrochloric acid may be used to adjust the pH of the water phase if required.



    Bitumen Emulsifier for Micro Surfacing


    Bitumen Emulsifier for Micro Surfacing


    We have Specialized Emulsifier for Micro Surfacing Emulsion production.
    For more information, kindly contact us.


    Bitumen Emulsifier for Anionic Emulsion


    REDICOTE E-7000


    This Emulsifier is for Anionic Bitumen Emulsion ,Clay based Emulsions which are used in Roof Coating Applications.

    Bitumen Emulsifier for Cold Mix Application


    Bitumen Emulsifier for Cold Mix Application


    Cold Mix Emulsions are normally prepared using Cationic Medium Setting or Slow Setting Emulsion with 60-65% bitumen content, which may contain some solvent. Solvent-free systems can be based on Slow-Setting Emulsions.

    For more information, kindly contact us.

    Liquid Anti Stripping Agent


    WETFIX BE


    it is a basically Adhesion Promoter , creates a strong chemical bond between bitumen and aggregate,giving better adhesion property reducing damage made to bituminous pavement due to poor aggregate surface chemistry and water seepage. These bonds are resistant to the action of water which extends the durability of the pavement.

    Properties


    - Liquid @ 20 deg C
    - For Hot Mix Plant - Works at 0.2 % - 0.5 % , by weight of Bitumen.
    - For Pot Holes Repairing - Works at 0.5% -1%, by weight of Bitumen.

    Benefits


    Protects asphalt pavements from moisture damage especially when exposed to frequent rain and freeze thaw cycles, thereby lowering maintenance costs.

    Minimizes the Stripping value of aggregates. This enables the use of wider range of Aggregates which otherwise are unfit for quality pavement.

    As a surfactant, it reduces the surface tension of Binder/Bitumen and thus felicitates the uniform coating of Bitumen to Aggregates.

    Increase the life Span of Pavement.


    Warm Mix Additive

    Warm mix is in all respects similar to hot mix except that the mixing transport, paving and compaction of the mixture is performed
    at lower temperatures, generally 20-30C lower than similar hot mixtures. The result is less ageing of the asphalt, lower energy
    consumption, reduced fume emissions at the job site and a longer paving season.

    REDISET LQ-1102CE


    AkzoNobel offers a warm mix system called Rediset LQ-1102CE which combines active adhesion promoting effect with the ability to coat and pave at significantly lower temperatures than hot mix. An advantage of the system is that PG grade of the asphalt is not affected, or is improved.